Steinbach
Steel wall pool Styria oval without accessories
- Galvanised, coated steel shell
- Steel wall connection with plug-in profile
- Plastic handrail and bottom rails
- strong winter-proof inner foil
- Skimmer and nozzle punching
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The steel wall pools of the "Styria" series are the most robust and strongest pools in this class. Not only the strong steel wall (approx. 0.80 mm at a depth of 150 cm), but also the winter-proof inner liner (liner colour adria blue: approx. 0.60 mm and liner colour sand: approx. 0.80 mm) allow year-round use. Disassembly in winter is not necessary. Punched holes for skimmer and inlet nozzle are already available. The "Styria" series in oval is only suitable for underground installation. A foundation plate and retaining walls on the long sides are required.
The *Skimmer set S1 is the optimal preparation for the circulation of your pool water. For the "Styria" series in oval with the pool size of 490 x 300 x 120 cm we recommend the *Steinbach filter unit Classic 250N or the *Steinbach filter unit Active Balls+. For all steel wall pools of the "Styria" Series in oval with a pool height of 150 cm and the pool size 800 x 400 x 120 we recommend the *Steinbach filter unit Compact 8. The *Steinbach filter unit Classic 400 is recommended for the pool sizes 625 x 360 x 120 and 737 x 360 x 120. These Steinbach filter units are perfectly matched to the "Styria" series in oval and ensure crystal-clear pool water.
(* not included in delivery)
Pool shape: oval
Product dimension: 490 x 300 x 120 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation
Water capacity: 13.800 l
Water filling height: 110 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness steel wall: 0,60 mm
Liner thickness bottom: 0,80 mm
Liner thickness wall: 0,80 mm
Color of inner liner: sand
Assembly min. number of persons: 2 - 4
Assembly time approx.: 420 - 540 min
Filter unit: no
Number of skimmers: no
Inlet nozzle: no
Hoses: no
Ladder: no
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Steel wall pools oval:
Depending on the model, the steel shell can either be completely sunken or partially sunken, but can also be free-standing. The steel wall pool is best placed on stable ground and on a horizontal, level and accessible surface. If you can stand on one leg without sinking in, the floor is stable.
You can find more information on preparing the substrate in the relevant operating instructions.
Yes, all steel wall pools are winter-proof and can therefore be left standing in winter. However, please note that the tips on correct winterization should be followed exactly.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
The use of steel wall pools with salt water can lead to rust problems that are not covered by the warranty.
Backfilling is only necessary if the pool is to remain without water for a longer period of time. Depending on the ground conditions and installation depth, a so-called slope failure can occur, which damages the pool wall. However, this situation can be prevented by backfilling with concrete.
The film must be produced higher so that it can be laid over the steel wall (i.e. it overlaps it). The overhang of the foil on the outer wall can be irregularly large despite correct tensioning. The excess film can be cut away after approx. 14 days, by which time the material will have fully expanded. Follow the instructions in the enclosed operating instructions carefully beforehand.