Steinbach
Steel wall pool Styria round without accessories
- Galvanised, coated steel shell
- Robust and strong construction
- Plastic handrail and bottom rails
- strong winterproof inner liner
- Skimmer and nozzle punching
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Steel wall pools of the Styria series are very robust. The steel wall (approx. 0.60 mm for pools up to 120 cm deep, 0.80 mm for 150 cm deep) and the winter-proof foil (Adriatic blue: approx. 0.60 mm and sand: approx. 0.80 mm) allow year-round use. The round series is suitable for partial or complete ground installation (with pressure protection). Pools with a depth of 1.50 m must be installed at least 60 cm deep. The Skimmer set S1* is used to prepare for water circulation.
Optionally we recommend for the Styria series round up to Ø 450 x 120 cm the Steinbach filter system Classic 250N* or the Steinbach filter system Active Balls+*. For the steel wall pool of the Styria series in round with Ø 500 x 120 cm and Ø 500 x 150 cm the Steinbach filter system Classic 400* is well suited. For the dimension of Ø 600 x 150 cm we recommend the Filter system Compact 8*.
(*not included in the scope of delivery)
Pool shape: round
Product dimension: Ø 600 x 150 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation, part installation
Water capacity: 38.100 l
Water filling height: 140 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness steel wall: 0,80 mm
Liner thickness bottom: 0,60 mm
Liner thickness wall: 0,60 mm
Color of inner liner: adriatic blue
Assembly min. number of persons: 2 - 4
Assembly time approx.: 180 - 300 min
Filter unit: no
Number of skimmers: no
Inlet nozzle: no
Hoses: no
Ladder: no
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Steel wall pools round:
Depending on the model, the steel shell can either be completely sunken or partially sunken, but can also be free-standing. The steel wall pool is best placed on stable ground and on a horizontal, level and accessible surface. If you can stand on one leg without sinking in, the floor is stable.
You can find more information on preparing the substrate in the relevant operating instructions.
Yes, all steel wall pools are winter-proof and can therefore be left standing in winter. However, please note that the tips on correct winterization should be followed exactly.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
The use of steel wall pools with salt water can lead to rust problems that are not covered by the warranty.
Backfilling is only necessary if the pool is to remain without water for a longer period of time. Depending on the ground conditions and installation depth, a so-called slope failure can occur, which damages the pool wall. However, this situation can be prevented by backfilling with concrete.
The film must be produced higher so that it can be laid over the steel wall (i.e. it overlaps it). The overhang of the foil on the outer wall can be irregularly large despite correct tensioning. The excess film can be cut away after approx. 14 days, by which time the material will have fully expanded. Follow the instructions in the enclosed operating instructions carefully beforehand.