INTEX INTEX

Hydro Aeration Set

Art.
  • Improved circulation and filtration

  • Improved water clarity

  • Improved air quality

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

from €9.99
incl. VAT, excl. shipping
Only %1 left

Only items left in stock

The minimum order quantity is 1

Product information

The innovative Hydro Aeration Technology™ for Intex Pools improves the circulation and filtration of the pool water and makes the water healthier and more comfortable. The Hydro Aeration Technology™ improves the water clarity and the air freshness around the pool. The Hydro Aeration Technology™ is suitable for Intex Pools with a hose connection of and a filter unit with a performance of .

112351_Aeration_gem_rev2_759x508mm-02.jpg

Improved Circulation and Filtration

Fine particles in water clump together and settle to the bottom of the pool during the aeration process, making it easier to filter and remove sediments through the filtration system. The improved filtration and circulation make the pool water healthier and more comfortable.

112351_Aeration_gem_rev2_759x508mm-03.jpg

Improved Water Clarity

By mixing air with water, the aeration process induces oxidation of iron and manganese, eliminating staining in water. The result is sparkling pool water that looks and feels great!

112351_Aeration_gem_rev2_759x508mm-04.jpg

Increased Negative Ions at the Water Surface!

Increased negative ions have been proven to improve the air freshness around the pool as it removes air pollutants and neutralizes free radicals that affect air quality.

10 1-1/4" POOL INL
€1.99
incl. VAT, excl. shipping
13 Inlet screen connection 1 1/4"
€1.99
incl. VAT, excl. shipping
14 Air nozzle valve
€3.99
incl. VAT, excl. shipping
16 End cap for air valve
€1.99
incl. VAT, excl. shipping
10 1-1/4" POOL INL
€1.99
incl. VAT, excl. shipping
13 Inlet screen connection 1 1/4"
€1.99
incl. VAT, excl. shipping
14 Air nozzle valve
€3.99
incl. VAT, excl. shipping
16 End cap for air valve
€1.99
incl. VAT, excl. shipping
17 Plastic hose clamp Ø 32 mm
€1.99
incl. VAT, excl. shipping
10 1-1/4" POOL INL
€1.99
incl. VAT, excl. shipping
13 Inlet screen connection 1 1/4"
€1.99
incl. VAT, excl. shipping
14 Air nozzle valve
€3.99
incl. VAT, excl. shipping
16 End cap for air valve
€1.99
incl. VAT, excl. shipping
17 Plastic hose clamp Ø 32 mm
€1.99
incl. VAT, excl. shipping
11 Nut for screw-on filter connector
14 Adjustable injection nozzle
€4.99
incl. VAT, excl. shipping
15 Air nozzle valve
€3.99
incl. VAT, excl. shipping
17 End cap for air valve
€1.99
incl. VAT, excl. shipping
11 Nut for screw-on filter connector
14 Adjustable injection nozzle
€4.99
incl. VAT, excl. shipping
15 Air nozzle valve
€3.99
incl. VAT, excl. shipping
17 End cap for air valve
€1.99
incl. VAT, excl. shipping

FAQs from category Filter system accessories:

All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.

All filter systems and filter pumps have a sound pressure level* of < 70 dB(A).

*The emission volume is comparable to a large household appliance.

In this case, the filter medium used is often contaminated. The filter medium used (quartz filter sand or filter balls) is subject to a certain amount of wear and tear, even when operated as intended under optimal conditions, and should be replaced at regular intervals, depending on the operating time and degree of contamination. For sand filter systems, switch off the pump and then set the filter setting to ‚Rückspülen/backwash'. Switch the filter system on again. Carry out the backwash process until clean water comes out of the backwash line (max. 2 minutes). When using Filter Balls, do not backwash. If the filter performance decreases, we recommend washing the Filter Balls by hand. If necessary, the Filter Balls should be replaced. In cartridge filter systems, the filter medium should be changed approx. every 2 weeks.

If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.

If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.

The filter system should always be the first part in the water treatment system. The rest of the pool accessoires should only be connected after the filter system. A heat pump should ideally always be the last part in the water treatment system, so that the filtered, treated water flows through the heat pump and the path of the heated water into the pool is as short as possible.

Symbol photos

The pictures shown are just for reference, the actual product may differ.