Retracted adapter B
- High-quality plastic
- Chlorine and saltwater resistant
- For connecting filter units type ECO with INTEX swimming pool hoses (Ø 38 mm with 2" thread)
- For connecting INTEX pools with Ø 32 mm with hose connection and gate valve with 2" thread
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
INTEX special adapter made of high-quality plastic for connecting filter unit Typo Eco with INTEX swimming pool hoses (Ø 38 mm with 2 "thread) or INTEX pools with Ø 32 mm hose connection and gate valve with 2" thread.
Dimension: 5,9 x 5,9 x 5,4 cm
FAQs from category Filter system accessories:
All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.
All filter systems and filter pumps have a sound pressure level* of < 70 dB(A).
*The emission volume is comparable to a large household appliance.
If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.
If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.
The filter system should always be the first part in the water treatment system. The rest of the pool accessoires should only be connected after the filter system. A heat pump should ideally always be the last part in the water treatment system, so that the filtered, treated water flows through the heat pump and the path of the heated water into the pool is as short as possible.