Steinbach recommends
Pool Professional Pool Professional

Pool Professional PoolLab

079090PP
Art.
  • Quick and easy sampling
  • 13 pool parameters for extensive measurement options
  • Wireless connectivity thanks to Bluetooth 4.0
  • Free cloud service
  • IP68 waterproof

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€149.00
incl. VAT, Free shipping
In stock

Only items left in stock

Product information

The new PoolLab® 1.0 is the perfect solution for professional water analysis of private pools and spas.
The permanently installed but replaceable cuvette allows quick sampling by simply immersing the IP68 waterproof PoolLab® in water.
6 keys allow direct access to the ZERO procedure (only 1x per measurement series required) as well as the individual measurement methods: pH, chlorine (free/bonded/total), alkalinity (acid capacity), cyanuric acid (stabiliser). Active oxygen (MPS), bromine, chlorine dioxide, ozone, hydrogen peroxide, hardness (total, calcium), urea and PHMB.
PoolLab® has Bluetooth and can therefore be connected wirelessly to the free software and app to synchronize test results on an account-specific basis, print reports and even receive dosing recommendations based on individually entered water care products. LSI index calculation is also offered via the software and app.
A free cloud service - if desired - ensures that software and app always work with synchronized data.

13 Pool Parameters
Bluetooth 4.0
Powerful App / Software
Free Cloud Service
6 keys for direct access
IP68 Waterproof
Also suitable for salt water pools / pools with salt electrolysis

 

Included in delivery:
PoolLab 1.0 Photometer
Sturdy storage box
Light protection cap
3 x AAA batteries
Stirring rod
Syringe for water withdrawal

Reagent tablets:
20 tablets DPD No 1
20 tablets Phenol Red
10 tablets DPD No 3
10 tablets Alkalinity-M
10 tablets CYA-Test

Please be aware that the shown product contain only the current scope of delivery, based on 2024.

FAQs from category Dosing aids:

If you put the chlorine tablets directly into the water, the chlorine will attack the liner, discolouring it and making it brittle. Irreversible damage not covered by any warranty may occur. All our dosing floats have an adjustment ring - to adjust the release to the pool water. Alternatively, you can also put the tablets into the skimmer.

The ideal pH value is between 7.0 and 7.4. If the pH value is too high (above 7.4) the water tends to form lime deposits (turbidity of the water). Eye and skin irritation could occur. The disinfection effect could also be reduced. If the value is too low (below 7.0), the water becomes increasingly corrosive. Odour nuisance and irritation of the mucous membranes may occur. We recommend measuring the value twice a week. For pH regulation we recommend 'ph + (plus) granules' or 'ph - (minus) granules'.

The ideal chlorine value is in the range of 0.3-0.6 mg/l. The measurement should be taken 1-2 times per week. If the value is too high, bathing is not recommended. If the value is in the lower range, we recommend products such as Chlorine Tabs 20, Chlorine Tabs 200, Quattrotabs 200, Total Blue 20 as continuous dosing.

Your chlorine level seems to be clearly too high - these tablets react up to a maximum concentration of 6 mg/l. Dilute the water taken and test again. If the values are too high, reduce them to a normal level (0.3 - 0.6 mg/l). After a shock chlorination the test is also not possible. Please wait a few hours.

Cause: Lime precipitates, not filtered particles
Solution: Adjust the pH level to 7.2 to 7.4 (by adding pH-Plus or pH-Minus). If there are suspended matters turn off the circulation pump and remove the flakes on the bottom with the pool cleaner after about 10-12 hours. Lime precipitates in the pool water (turbidity, shimmering white coating on the water surface, etc.) usually disappear shortly after adjusting the pH level and after the addition of a flocculants (while the filter system is running - WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!). Backwash thoroughly. Clean cartridge filter or replace by a new one.

Possible Causes: Faulty filter function, too many organic substances
Solution: Backwashing. If the filter system is calcified, use an acidic filter cleaner. If the filter system is ok, make a shock chlorination, meaning raise the chlorine level of the pool water up to 3 mg/l for a short time. The addition of flocculant is recommended as an additional measure (WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!). Backwash thoroughly. Clean cartridge filter or replace by a new one.

Possible cause: Too little disinfectant in the water, algae growth
Solution: Adjust the pH level to 7.2 to 7.4 by adding pH-Plus or pH-Minus. Let the filter system run continuously during the first 1-2 days. For disinfection with chlorine: Wipe dead algae from the pool walls. Remove algae from bottom with a brush and an aspirator. Make a shock chlorination, meaning raise the chlorine level of the pool water up to 3 mg/l. The addition of an algae protection is recommended. Backwash thoroughly. The added chlorine has degraded after a few days. Backwash thoroughly. If the water is not clear after 1-2 days, repeat the procedure. Cartridge filter system: Frequently clean or replace the cartridge. Alternatively, empty the pool completely, clean thoroughly and refill. After adjusting the pH value, treat the pool water with algicide to prevent new algae grow.

Possible cause: Iron deposits in the water
Solution: Adjust the pH level to 7.2 to 7.4 by adding pH-Plus or pH-Minus. Add flocculant. (WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!)  Extend the filter runtime, backwash the filter system thoroughly. In the case of a cartridge filter system, clean the cartridge regularly and replace it if necessary.

Possible cause: Inadequate chlorine dosing, non-degraded organic substances
Solution: Adjust the pH level to 7.0 to 7.4 by adding pH-Plus or pH-Minus. After a shock chlorination up to ca. 3 mg/l this smell will disappear after a short time.

Possible cause: Inadequate chlorine dosing, non-degraded organic substances
Solution: Adjust the pH level to 7.0 to 7.4 by adding pH-Plus or pH-Minus. If there is too little chlorine in the water, increase the chlorine content. If the chlorine content is too high, reduce the dosage or drain the pool water and refill with fresh water. Again, pay attention to the pH value.

Take a bucket of warm water, add the required amount of chemical for your pool and stir well. Then empty the bucket with the mixture evenly into the pool with the filter system switched on (circulating).

The lid of our chemical articles also serves as a dosing aid.

Our chemistry must be equipped with a safety lock for the protection of children. This requires some strength to open.

Safety data sheets are stored with the respective chemical article on our homepage. If you still cannot find what you are looking for, please contact us via our form on our helpdesk.

Important information

Use biocides safely. Always read the label and product information before use.

Symbol photos

The pictures shown are just for reference, the actual product may differ.