Steinbach
Circulation pump with PV panel
- Pool heating with solar power
- Self-sufficient operation
- For pools up to 19.000 l
- Long-term energy savings
- Ideal for pool heat pumps
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The Circulation pump with PV panel offers an environmentally friendly solution for heating your pool and at the same time optimizes pool operation thanks to its versatility. With a pump capacity of 3.000 l/h, it is ideal for pools with a water capacity of up to 19.000 l. Thanks to the included foldable monocrystalline silicon PV panel, the pump operates completely autonomously and uses the power of the sun to heat the pool water. This self-sufficient mode of operation not only reduces energy consumption, but also significantly reduces operating costs.
The circulation pump acts as a solar foil booster by pumping cold water upwards and creating a continuous flow under the solar foil. This distributes the warm water evenly throughout the pool. As a heat pump booster, the pump takes over the volume flow via the heat pump, allowing the "heating" and "filtration" functions to be performed separately and more efficiently. The circulation pump also proves extremely useful as a solar collector booster, as it ensures the volume flow via the solar collector when there is sufficient solar radiation, thus maximizing efficiency. In addition, the pump takes over vacation filtration during longer periods of absence by ensuring the volume flow via the filter and thus ensuring continuous filtration.
The circulation pump with PV panel offers numerous advantages: it reduces energy consumption by using solar energy, significantly lowers operating costs thanks to its self-sufficient operation, is quick and easy to install and operates quietly, so that peace and relaxation by the pool are not disturbed. It also minimizes the environmental impact by using renewable energy. With the circulation pump with PV panel, you are opting for sustainable and cost-efficient pool heating that offers a wide range of applications and provides optimum support for pool operation. Treat yourself to the pleasure of a warm pool with minimal environmental impact.
Filter pump:
Salt water suitable: no
Water capacity: 19.000 l
Pump power: 3.000 l/h
Power supply: 24 V⎓, Included 30 W PV panel
Input power maximum: 15 W
Transformer: no
Head: 2,0 m
Operating principle: non-self-priming
Pre-filter: no
Timer present: no
Connection size: Ø 32/38 mm / 1" AG
*Sound pressure level: 40 dB(A)
Protection class: III
Protection code: IPX8
Insulation class: F
Cable length to unit: 1,70 m
Water temperature: 10°C - 35°C
Pump dimensions: 25 x 10.5 x 18.5 cm (L x W x H)
PV panel:
Cell type: Monocrystalline
Number of solar modules: 4
Design: foldable, portable, detachable
Connection plug: 2-pin round plug
Output power: 30 W
Maximum output current: 1,25 A
Maximum output voltage: 24 V⎓
Open-circuit voltage: 28,32 V
Short-circuit current: 1,38 A
Best operating temperature: 15°C - 45°C
Ambient temperature: 0 °C - 60°C
Protection code: IP65
Cable length to pv panel device: 0.5 m
PV panel dimensions: 88 x 25 x 2 cm (L x W x H)
PV panel dimensions (folded): 25 x 22 x 8 cm (L x W x H)
Pump and PV panel dimensions when assembled: 88 x 19 x 18 cm (L x W x H)
*Emission sound level comparable to a large household appliance
FAQs for Circulation pump with PV panel:
Pre-switch the external timer. The filter pump is started and stopped with the external timer.
FAQs from category Filter pumps:
All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.
All filter systems and filter pumps have a sound pressure level* of < 70 dB(A).
*The emission volume is comparable to a large household appliance.
If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.
If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.
The filter system should always be the first part in the water treatment system. The rest of the pool accessoires should only be connected after the filter system. A heat pump should ideally always be the last part in the water treatment system, so that the filtered, treated water flows through the heat pump and the path of the heated water into the pool is as short as possible.