
Filter unit Active Balls 75
- Increased efficiency and cost savings
- Long service life of the filter medium
- High dirt holding capacity
- Self-priming pump with prefilter and manometer
- Suitable for salt water up to a salt content of 5 g/l
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Product information
The Filter unit Active Balls 75 has a circulation capacity of 6.500 l/h, the connection is 220-240V~ / 50Hz / 450 W. This filter system can be used for pools with approx. 33.000 l water content and can be connected to all commercially available installation pools with a hose connection Ø 32/38 mm. Through the perfectly coordinated interaction of the Filter unit Active Balls 75 and the Filter Balls, you receive crystal-clear pool water efficiently, sustainably and cost-effectively. The filter system can be used up to a maximum water temperature of 35 °C.
Filter system:
Salt water suitable: yes
Water capacity: 33.000 l
Circulation capacity: 6.500 l/h
Boiler size: 415 mm
Connection size: Ø 32/38 mm
Valve type: no
Sound pressure level: < 70 dB(A)
Water temperature: 5°C - 35°C
Usable filter medium: Filter Balls (included in the delivery)
Quantity of usable filter medium: 1150 g
Pump part number: 040916
Filter pump:
Power supply: 220-240V~ / 50Hz
Input power maximum: 450 W
Transformer: no
Pump capacity: 8.500 l/h
Operating principle: self-priming
Head: 9,00 m
Pre-filter: yes
Timer present: yes
Protection class: IPX5
Insulation class: F
Cable length to unit: 1,50 m
FAQs for Filter unit Active Balls 75:
Set the timer on the filter pump to 24 hours. The filter pump is started and stopped with the external timer.
Make sure that you have previously activated the memory backup function of the timer. The following steps must be observed:
- Make sure that the power cable of the pump is disconnected from the power supply.
- Use a PH1 Phillips screwdriver to remove the screws from the timer cover and remove the cover.
- Pull out the plastic strip that can be seen underneath the battery.
- Screw the cover back on again. The timer's memory backup function is now activated.
FAQs from category Filter Balls & Wool Flakes:
We do not recommend cleaning Filter Balls or Filter Wool Flakes in the washing machine or tumble dryer. As they shrink considerably when wet, they could get behind the drum and damage the machine.