Steinbach
Summer covers for oval steel wall pools
- Reduces evaporation of the pool water
- Reduces cooling of the pool water
- Reduces contamination in the pool
- Reduces use of pool chemicals
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The fast and easy solution for your steel wall pool. The reinforced PE cover panel offers protection from dirt, reduces evaporation, and keeps your pool water clean and warm for longer. The cover is placed directly onto the surface of the water, and is attached using a tension cord and ratchet. 70 cm excess ensures optimal fit. The sheet comes with a blue top and a black underside.
Benefits for you:
- Strong PE material 94 g/m²
- 70 cm excess
- Attached via tension cord and ratchet
- Reduces evaporation of the pool water
- Reduces cooling of the pool water
- Reduces contamination in the pool
- Reduces use of pool chemicals
Shape: oval
Dimension: 730 x 370
Overhang: 65 cm
Material thickness: 0,15 mm
UV-resistant: yes
Suitable for salt water: yes
FAQs from category Pool covers:
Pool covers with integrated water holes offer a practical solution for allowing rainwater to drain away directly without having to pump it out first. The drainage holes are dimensioned in such a way that they drain away rainwater while retaining coarse dirt. This helps to reduce the amount of cleaning required and minimises the use of water care products. The small holes in the centre of the solar cover also have a safety-relevant function: they prevent the cover from being weighed down too heavily in the rain and sliding into the pool, similar to conventional pool covers. In addition, small holes are distributed along the edge of the solar cover, which sometimes do not appear completely even. However, this has no effect on the efficiency or service life of the solar cover.
Covers are laid over the entire surface of the water, pulled up to the side, placed over the handrail, folded down and then attached. This requires this excess. (Summer cover: oversize 70 cm = 35 cm per side, winter cover: oversize 130 cm = 65 cm per side) The winter cover is more oversized because the water level is lowered accordingly during the winter months.
Covers for inground steel wall pools, for example, can be found in the ‘Pool accessories’ section. We do not currently offer covers for polystyrene pools.
For easier differentiation, as these covers have certain oversizes. Both are black on the underside.
This has a light-reducing effect (as light supports algae growth).
Cover tarpaulins cover the pool 100 %. This also means that there is no pollution in the water. No pollution means less chemical consumption. By reducing evaporation, cooling of the pool water is also massively reduced.