Steinbach
Oval liner for pools 120 cm deep, suspended profile
- Special covers for swimming pools
- Winter-proof
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The Oval liner for pools 120 cm deep, suspended profile with a thickness of 0,80 mm and dimensions of 490 x 300 x 120 cm is the perfect choice for your pool with the pool shape oval. This liner with the suspended profile finish is UV-resistant, suitable for salt water, winter-proof and made of robust vinyl. It offers easy installation and long-lasting protection, making it suitable for year-round use. Rely on quality for uninterrupted bathing fun and long-lasting pool equipment.
UV-resistant: yes
Pool form: oval
Dimension: 490 x 300 x 120 cm
Liner thickness: 0,80 mm
Liner construction: suspended profile
Material: vinyl
Entrance option: n.r.
Salt water suitable: yes
FAQs from category Steel wall pool liners:
The pool should be set up at outside temperatures between at least 15°C and a maximum of 25°C, as the pool liner is easiest to work with in this temperature range. At cooler temperatures, the liner contracts, while at higher temperatures it tends to expand. Within the optimum temperature range, the liner can be easily formed into the desired shape. If the installation is started at lower temperatures, the film can be more difficult to process and may appear too small.
Due to the material of the pool liner, it is not possible for holes or cracks to occur in the pool liner without outside interference.
Possible causes are:
- Incorrect storage, e.g. below the minimum temperature of 5 °C specified in the operating instructions.
- Incorrect use of pool chemistry (incorrect dosage, etc.)
- Use of chemistry that is not suitable for pool operation
- Insufficient cleaning after dismantling - residues on the pool liner start to react and attack the material
- Holes can also be caused by animals (cats, birds, rodents, etc.)
The film must be produced higher so that it can be laid over the steel wall (i.e. it overlaps it). The overhang of the foil on the outer wall can be irregularly large despite correct tensioning. The overhang of the film can be cut off later after the film has been hung correctly. Follow the instructions in the enclosed operating instructions carefully beforehand.